Pioneer DVR-65H-S Training Manual page 49

Table 2: Key operations in General Setting mode
Key
INPUT SELECT,
Switches inputs or channels.
CHANNEL +/–
(∗R)
[SIDE A], [SIDE B] Sets Sync AGC.
[Rev ×3], [×3 Fwd]
Sets Threshold level.
[Rev CHAPTER SKIP]
[CHAPTER SKIP Fwd]
Sets Threshold level.
[Rev SCAN],
Sets V-Sync Det.
[SCAN Fwd]
[Rev STILL STEP],
Sets Std Det.
[STILL STEP Fwd]
[SPEED +], [SPEED -] HD Err Det
Initializes the setting of General
CLEAR
Setting mode.
Exits AVIO setting for specific areas,
ESC
clearing the OSD.
∗R: Refers to keys on the remote control unit supplied with this unit. The keys without "R" refer to the remote control unit for service.
∗1 : In General Setting mode, if the channel displayed has specific settings, the following will be displayed.
[Display in General Setting mode when the channel currently displayed has specific settings]
AVIO Specific Area Mode Ver*.**
Input - [tuner ]
Sync AGC : ON
Threshold : Normal
V-Sync Det : Normal
Std Det : Normal
HD Err Det : Normal
This channel is set up
individually.
(effective only during recording/playback stop)
Operation
ON (∗) / OFF
(∗) Normal
Auto Threshold Level
Manual Threshold Level
Pedestal Level
According to the setting of Threshold,
the values can be changed within the
range mentioned below.
• Normal:
The value is fixed, with no display of
the value.
• Auto Threshold Level:
0-8 (Default: 0)
• Manual Threshold Level:
0-8 (Default: 0)
• Pedestal Level:
0-8 (Default: 0)
Normal (∗) /Short/Long
Normal (∗) /Non STD
Normal (∗) /Fast/Stop
*
*
*
*
*
49
Setting (∗: Default)
–
–
–
Remarks
–
–
–
–
–
–
–
–
–
–
Pressing the key resets all settings
of General Setting mode to the
initial values. Settings of Specific
Channel Setting mode are not
affected (they are retained).
–