Pioneer DVR-65H-S Training Manual page 72

<<diagnostic method>>
3) Perform Self Test.
Press [3] on a menu to display the next screen.
Next, if [1] is pressed, Self Test will begin.
S.M.A.R.T. DST (Drive Self Test)
1. Exe Self Test
2. Exe Ext Self Test
The situation of a test is shown as the above screen. The remain is displayed by %, and if it
results to 00%, a test will end it. Check the existence of an error after a test end.
[Judgment criteria]
- "--Completed" is displayed when the HDD have no error
Please execute the following Extended Self Test.
- "--Error" is displayed when the HDD with an error
Refer to Test Result. If the single figure is "1" or "2", perform this test again.
If the result of a re-test is the same, or if it is "3" or "7", HDD should be replaced.
[example of no Error]
SELF TEST
Test Remainder : 00%
Test Result : 00
...Completed
After a check, press [Clear] to return to a menu screen.
[clear]:Test End
SELF TEST
Test Remainder : 70%
Test Result : Under execution
[example of Error]
SELF TEST
Test Remainder : 60%
Test Result : 7 6
...Error
[PAUSE]:Test Stop
[clear]:Test End
72