Pioneer DVR-65H-S Training Manual page 47

Table 1: Key operations in Specific Channel Setting mode
(effective only during recording/playback stop)
Key
Switches cyclically between General
DIG/ANA Setting mode and Specific Channel
Setting mode.
INPUT SELECT,
CHANNEL +/–
Switches inputs or channels.
(∗R)
[SIDE A], [SIDE B] Sets Sync AGC.
[Rev ×3], [×3 Fwd]
Sets Threshold level.
Sets Threshold level.
[Rev CHAPTER SKIP]
[CHAPTER SKIP Fwd]
[Rev SCAN], Sets V-Sync Det.
[SCAN Fwd]
Sets Std Det.
[Rev STILL STEP],
[STILL STEP Fwd]
[SPEED +], [SPEED -] HD Err Det
All channels assigned to have specific
settings are canceled, and the
PLAY
specific settings are reset to their
default values.
Initializes the setting of Specific
CLEAR
Channel Setting mode.
The specific-setting data for the
currently selected channel are reset
to their default values.
PAUSE
(But the assignment of a channel
having specific settings is not
canceled.)
Exits AVIO setting for specific areas,
ESC
clearing the OSD.
∗R: Refers to keys on the remote control unit supplied with this unit. The keys without "R" refer to the remote control unit for service.
Operation
ON (∗) / OFF
(∗) Normal
Auto Threshold Level
Manual Threshold Level
Pedestal Level
According to the setting of Threshold,
the values can be changed within the
range mentioned below.
• Normal:
The value is fixed, with no display of
the value.
• Auto Threshold Level:
0-8 (Default: 0)
• Manual Threshold Level:
0-8 (Default: 0)
• Pedestal Level:
0-8 (Default: 0)
Normal (∗) / Short / Long
Normal (∗) / Non STD
Normal (∗) / Fast / Stop
47
Setting (∗: Default)
–
–
–
–
–
–
Remarks
–
–
–
–
–
–
–
–
–
–
–
–
Settings of General Setting mode
are not affected.
Pressing the key resets the settings
of Specific Channel Setting mode
for that channel to the initial values.
Settings of General Setting mode
are not affected.
Settings of General Setting mode
are not affected (retained).
–