Channel Setting Mode 46~49 - Pioneer DVR-65H-S Training Manual

Purposes: Depending on the area, jitter may appear in a picture received by the tuner, as conditions of signals received by
the tuner are different from area to area. To correct this kind of problem, the function of the System Codec AVIO
control section for adjusting signals received by the tuner can be used.
How to enter setting modes: To enter General Setting mode, press the ESC key then the CHP/TIM key of the remote control
How to exit setting modes: Press the ESC key. The setting mode is exited, the OSD disappears.
1. Specific Channel Setting mode
This mode is entered when the DIG/ANA key is pressed in General Setting mode. In this mode, specific settings can be made for up to 12
channels. For channels that do not have specific settings, the settings of General Setting mode are applied.
Display in Specific Channel Setting mode (A picture from the tuner can be viewed using the semitransparent OSD display.)
[Display in Specific Channel Setting mode]
[When specific channel settings have NOT
been made]
AVIO Specific Area Mode Ver *.**
Input - [ tuner ]
Sync AGC : ON
Threshold : Normal
V-Sync Det : Normal
Std Det : Normal
HD Err Det : Normal
Individual setting state
Input Channel - [ 1CH]
Sync AGC : ---
Threshold : ------
V-Sync Det : ------
Std Det : ------
HD Err Det : ------
∗ : setting is the default.
• If a channel that does not have specific settings is displayed, the setting figures are displayed as hyphens (--).
If the setting figures are not displayed as hyphens, those settings have been specifically set even if they are identical to the default settings
or those of General Setting mode.
• The channels to be displayed in "Input Channel" are as follows:
• In a case of line input: L1-L3, DV
• In a case of tuner input: Received channel (a channel to be set in specific channel settings)
unit for service. To enter Specific Channel Setting mode, press the DIG/ANA key in General
Setting mode.
*
General Setting data
*
*
*
*
Specific Channel
Setting data
[When specific channel settings have
been made]
AVIO Specific Area Mode Ver *.**
Input - [ tuner ]
Sync AGC
Threshold
V-Sync Det
Std Det
HD Err Det
Individual setting state
Input Channel - [
Sync AGC
Threshold
V-Sync Det
Std Det
HD Err Det
46
: ON *
: Normal *
: Normal *
: Normal *
: Normal *
1CH]
: ON
: Auto Threshold Level---[3]
: Normal
: Normal
: Normal