If A Power Failure Occurs - Panasonic KX-FT33NZ Operating Instructions Manual

1
Operations
Fax reception
Problem
Cause & Remedy
1 cannot receive documents
automatically.
• The receive mode is set to the TEL mode. Set to the TEL/FAX or
FAX ONLY mode,
• The time to answer the call is too long. Decrease the number of
rings (p. 41,44).
The recording image is faint.
• The sender transmitted a faint document. Ask them to transmit a
clearer copy of the document.
• The thermal head is dirty. Clean it (p. 56).
The received document is blank.
• The recording paper roll is installed incorrectly. Make sure that the
shiny side of the paper is facing down and re-install the paper
(p. 17).
Copying
Problem
Cause & Remedy
A dirty pattern or a black line
appears on the copied documents.
• The glass or rollers are dirty. Clean them (p. 56).
The copied image is distorted.
• The thermal head is dirty. Clean it (p. 56).
The copied document is blank.
-
—
-------
• The recording paper roll is installed incorrectly. Make sure that the
shiny side of the paper is facing down and re-install the paper
(p. 17).
If a power failure occurs
• The unit will not function.
• The memory contents will not be erased.
• When you set delayed transmission and the programmed start time has passed during a power failure, the
transmission will be attempted after power is restored.
53