Sending A Fax Manually - Panasonic KX-FT25HG Operating Instructions Manual

Sending a fax
1 Check that the document stacker is in the
upright position.
2 Adjust the width of the document guides to
the size of the document.
3 Insert the document (up to 10 pages) FACE
DOWN until the unit grabs the document and
a single beep is heard.
Display:
If necessary, press
4
to select the desired setting (see below).
5 Press
DIGITAL SP-PHONE
handset. (This step is optional. See note.)
6 Dial the fax number.
Example:
When a fax tone is heard:
7
Press START/COPY/SET
handset if using it.
OR
When the other party answers your call:
Ask them to press their start button. When a
fax tone is heard, press your
START/COPY/SET
if using it.
To feed more than 10 pages at a time
Insert the first 10 pages of the document. Add the
extra pages (up to 10) before the last page is fed
into the unit.
To redial the last number
Press
REDIAL/PAUSE
If the line is busy, the unit will automatically
redial the number up to 5 times.
During redial, the following will be displayed.
Display:
To cancel redialling, press
To stop transmission
Press STOP .
To eject the document, press
manually!
STANDARD
repeatedly
RESOLUTION
or lift the
TEL=
TEL=5678901
, and replace the
and replace the handset
CONNECTING.....
.
WAITING REDIAL
again.
STOP
again.
STOP
Sending Faxes
Document
RESOLUTION
Handset
FACE DOWN
REDIAL/PAUSE
DIGITAL SP-PHONE
Note:
If you cannot send a fax, confirm the
problem by printing a journal report
(p. 86) and see page 76 to solve the
problem.
Performing step 5 allows you to identify
any possible problems in sending a fax.
For the parties with whom you have
experienced no problems, you can skip
step 5. Dial the fax number and press
START/COPY/SET
To select the resolution
Select the desired resolution according to the type
of document.
STANDARD:
For printed or typewritten
originals with normal-sized
characters.
FINE:
For originals with small printing.
SUPER FINE:
For originals with minute printing.
HALF TONE:
For originals containing
photographs, shaded drawings,
etc.
Using the fine, super fine or half tone setting will
increase the transmission time.
If the resolution setting is changed during
feeding, it will be effective from the next sheet.
The super fine resolution only works with other
compatible fax machines.
stacker
Document
guide(s)
STOP
START/COPY/SET
.
33