Connecting A Keyboard Wedge Interface - Motorola Symbol LS3408 Product Reference Manual

5 - 2 Symbol LS3408 Product Reference Guide

Connecting a Keyboard Wedge Interface

Keyboard Connector
Keyboard Wedge Interface Connection with Y-cable
Figure 5-1
To connect the keyboard wedge interface Y-cable:
NOTE Interface cables vary depending on configuration. The connectors illustrated in
only. The connectors may be different than those illustrated, but the steps to connect the scanner remain
the same.
Turn off the host and unplug the keyboard connector.
1.
Attach the modular connector of the Y-cable to the cable interface port on the scanner. (See
2.
Interface Cable on page
Connect the round male DIN host connector of the Y-cable to the keyboard port on the host.
3.
Connect the round female DIN keyboard connector of the Y-cable to the keyboard connector.
4.
If required, attach the optional power supply to the connector in the middle of the Y-cable.
5.
Ensure that all connections are secure.
6.
Turn on the host system.
7.
Select the Keyboard Wedge host type by scanning the appropriate bar code from the
8.
Types section
To modify any other parameter options, scan the appropriate bar codes in this chapter.
9.
Male DIN Host Connector
Female DIN Keyboard Connector
1-3.)
onpage 5-4.
Y-cable
Figure 5-1
Keyboard Wedge Host
are examples
Installing the