Motorola Symbol LS3408 Product Reference Manual page 172

12 - 28 Symbol LS3408 Product Reference Guide
Set Lengths for Code 11 (continued)
Two Discrete Lengths - This option allows the scanner to decode only those Code 11 symbols containing
either of two selected lengths. Lengths are selected from the numeric bar codes beginning on page D-1 in
Appendix D, Numeric Bar Codes. For example, to decode only those Code 11 symbols containing either 2 or 14
characters, select Code 11 - Two Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to
change the selection, scan Cancel on page D-3.
Code 11 - Two Discrete Lengths
Length Within Range - This option allows the scanner to decode a Code 11 symbol with a specific length
range. The length range is selected from numeric bar codes beginning on page D-1 in Appendix D, Numeric
Bar Codes. For example, to decode Code 11 symbols containing between 4 and 12 characters, first scan Code
11 - Length Within Range. Then scan 0, 4, 1, and 2 (single digit numbers must always be preceded by a leading
zero). In case of an error, or to change the selection, scan Cancel on page D-3.
Code 11 - Length Within Range
Any Length - This option allows the scanner to decode Code 11 symbols containing any number of characters
within the scanner capability.
Code 11 - Any Length