Chapter 6 RS-232 Interface
Introduction
This chapter provides RS-232 host information for setting up the scanner. The RS-232 interface is used to attach
the scanner to point-of-sale devices, host computers, or other devices with an available RS-232 port (i.e., com
port).
If the particular host is not listed in
communication parameters for hosts not listed, refer to the documentation for the host device.
NOTE This scanner utilizes TTL RS-232 signal levels, which interfaces with most system architectures. For
system architectures requiring RS-232C signal levels, Motorola offers different cables providing the TTL to
RS-232C conversion. Contact Motorola Enteprise Mobility Support for more information.
Throughout the programming bar code menus, default values are indicated with asterisks (
Table
6-2, set the communication parameters to match the host device. To set
*
*
Indicates Default
Baud Rate 9600
Feature/Option
*
).