Advertisement
This key allows operation in conjunction with the Internet Connection feature.
6.
[MHz(SET)] Key
This key allows tuning in 1-MHz steps (the MHz digits will blink on the display). If
receiving on a memory, pressing this key the first time activates the Memory
Tuning mode, and pressing it again enables 1-MHz steps.
Press and hold in this key for one second to activate the "Set" (Menu) mode.
7.
[REV(DW)] Key
During split-frequency operation, such as through a repeater, this key reverses the
transmit and receive frequencies.*
Press and hold in this key for one second to activate the Dual Watch feature,
described in the Operation chapter ("PRI" will be displayed on the LCD, indicating
"Priority Channel" monitoring).
* Using the Menu, the "Reverse" feature may be disabled in favor of one-touch a
access to the "Home" Channel. See page 33 for details.
8.
[LOW(A/N)] Key
Press this key momentarily to select the transmitter power output level.
The available power levels are:
HIGH (75W)
To toggle the display between indication of the frequency and the channel's
Alpha/Numeric label, press and hold in this key for one second while receiving on
that memory channel.
9.
[D/MR(MW)] Key
Press this key momentarily to switch the frequency control among the VFO,
Memory System, and Home channel.
Press and hold in this key for one second to activate the Memory Storage mode.
10. DIAL Knob
This 24-position detented rotary switch is used for tuning, memory selection and
most function settings. The microphone [UP]/[DWN] buttons duplicate the
functions of this knob.
11. Display
MID (30W)
LOW2 (10W)
8
FCC ID:K6620393X50
IC: 511B-20393X50
Operating Manual
LOW1 (5W)
Advertisement
