Advertisement
repeaters using a mix of both CTCSS and DCS control via the Set mode.
1.
Press and hold in the [MHz(SET)] key for one second, then rotate the DIAL knob to
select "48 SPLIT."
2.
Press the [MHz(SET)] key, then rotate the DIAL knob to set this Menu item to
"ON" (to enable the Split Tone feature).
3.
Press and hold in the [MHz(SET)] key for one second to save the new setting and
exit to normal operation.
When the Split Tone feature is activated, you can see the following additional
parameters following the "RV TN" parameter (while selecting the tone mode by Set
mode item "49 SQL.TYP"):
T CODE: DCS Encode only (the "DCS" icon will blink during operation)
T DCS:
Encodes a CTCSS Tone and Decodes a DCS code (the "T" icon will
blink and the "DCS" icon will appear during operation)
D TONE: Encodes a DCS code and Decodes a CTCSS Tone (the "T SQ" icon will
appear and "DCS" icons will blink during operation)
Select the desired operating mode from the selections shown above.
Nine DTMF Autodialer memories are available on the FT-2900R. These DTMF
Autodialer memories can store up to 16 digits of a telephone number for repeater
autopatch or other use.
To load DTMF Autodialer memories, use the following procedure:
1.
Press and hold in the [MHz(SET)] key for one second, then rotate the DIAL knob to
select "19 DT SET."
2.
Press the [MHz(SET)] key, then rotate the DIAL knob to select the DTMF
Autodialer memory channel number into which you wish store a telephone number
("C0" to "C9").
3.
Press the [REV(DW)] key momentarily, then rotate the DIAL knob to select the
first digit of the telephone number you wish to store.
4.
When you have selected the correct digit, press the [LOW(A/N)] key momentarily.
Now, rotate the DIAL knob to select the second of 16 available numbers in the
current DTMF Autodialer memory register.
5.
Repeat this procedure for each digit in the telephone number. If you a mistake,
press the [REV(DW)] key to move back to the first digit, then re-enter the correct
number.
DTMF Autodialer Operation
23
FCC ID:K6620393X50
IC: 511B-20393X50
Operating Manual
Advertisement
