Advertisement
last-stored memory channel.
LOWER:
Stores the data into the lowest-available "Free" channel.
30 NM SET
Function: Programming an Alpha/Numeric label for a Memory Channel.
See page ** for details.
31 OPN.MSG
Function: Selects the Opening Message that appears when the radio is powered on.
Available Values: DC / MSG / OFF
Default: DC
DC:
DC supply voltage
MSG: Set by user. See below.
OFF:
No Opening Message
Here's how to program the Opening Message:
1.
Set this Set Mode Item to "MSG."
2.
Press the [LOW(A/N)] key momentarily to enable programming of the opening
message. You will notice the first character entry's location blinking.
3.
Rotate the DIAL knob to select the first letter/number of the message, then press
the [LOW(A/N)] key momentarily to save the first letter/number and move on to
the next character.
4.
Repeat the previous step as necessary to complete the message (up to six
characters).
5.
If you make a mistake, press the [DW(REV)] key to back-space the cursor; now
re-enter the correct letter/number.
6.
When you have entered the desired opening message, press the [MHz(SET)] key
momentarily to confirm the message, then press and hold in the [MHz(SET)] key
for one second to save the settings and exit to normal operation.
32 PAGER
Function: Enables/Disables the Enhanced CTCSS Paging & Code Squelch function.
Available Values: ON / OFF
Default: OFF
33 PAG.ABK
Function: Enables/Disables the Answer Back function of the Enhanced CTCSS Paging
52
FCC ID:K6620393X50
IC: 511B-20393X50
Operating Manual
Advertisement
