Advertisement
register (F0 ~ F9) into which you wish to store the access code.
3.
Press the [LOW(A/N)] key momentarily. The first digit will blink.
4.
Rotate the DIAL knob to select "F" (representing DTMF "#" the first digit of the
DTMF string).
5.
Press the [LOW(A/N)] key momentarily to accept the first digit and move to the
second digit of the DTMF string.
6.
Repeat the previous steps until you have completed the access code ("#(F)1101D").
7.
If you attach an alpha/numeric name "Tag" to the Internet Memory, proceed to the
next step; otherwise press and hold in the [MHz(SET)] key for one second to save
the setting.
8.
Press the [MHz(SET)] key twice to enable programming of the name tag (The
Internet Memory register number will blink).
9.
Press the [LOW(A/N)] key momentarily. The first digit will blink.
10. Rotate the DIAL knob to select the first digit of the desired label.
11. Press the [LOW(A/N)] key to move to the next character.
12. If you make a mistake, press the [REV(DW)] key to back-space the cursor, then
re-enter the correct letter, number, or symbol.
13. Repeat steps 10 and 11 to program the remaining letters, numbers, or symbols of
the desired label. A total of six characters may be used in the creation of a label.
14. When you have programmed a label which is under 6 characters, press and hold in
the [MHz(SET)] key for one second to confirm the label.
15. Repeat steps 1 through 14 to store other access codes, if so desired.
16. Press the PTT switch to save the setting and exit to normal operation.
Operation (Accessing an FRG Node)
1.
Press and hold in the [MHz(SET)] key for one second, then rotate the DIAL knob to
select "23 INT MD."
2.
Press the [0(SET)] key, then rotate the DIAL knob to set this Set Mode Item to
"FRG" (thus activating the "Other Internet Link System" mode).
3.
Press and hold in the [MHz(SET)] key for one second to save the new settings.
4.
Press the [%] key momentarily to activate the Internet Connection feature. The
"Int" notation will appear in the upper right corner of the display.
5.
Rotate the DIAL knob while pressing the [%] key to select the Internet Memory
register number (F0 ~ F9) (or Name) corresponding to the Internet link repeater to
which you wish to establish an Internet link, then press the PTT switch
momentarily to lock in the selected access number.
39
FCC ID:K6620393X50
IC: 511B-20393X50
Operating Manual
Advertisement
