Advertisement
memory channel number appear on the display; this indicates that the "Memory
Recall" mode is now engaged.
2.
When more than one memory has been stored, use the DIAL knob to select any of
the programmed memories for operation. Alternatively, the microphone's [UP] or
[DWN] button may be used to step or scan through the available memories. When
using the microphone's buttons, press the button momentarily to move one step up
or down; press and hold in the [UP] or [DWN] button for one second to begin
memory scanning.
Memory Recall from the Microphone's Keypad:
While operating in the Memory Recall mode, the keypad of the MH-48A6J Microphone
may be used for direct recall of memory channels.
To do this, press the Channel Number you wish to recall, then press the [#] key. For
example, to recall Memory Channel "5," press [5]
"118," press [1]
[1]
You may also recall Programmable Memory Scan (PMS) channels ("L0/U0" through
"L9/U9") using the following numbers: Programmable Memory channels #L0 = "200,"
U0 = "201," L9 = "218," and U9 = "219."
Labeling Memories
You may wish to append an alpha-numeric "Tag" (label) to a memory or memories, to
aid in recollection of the channel's use (such as club name, etc.). This is easily
accomplished using the Set (Menu) mode.
1.
Recall the memory channel on which you wish to append a label.
2.
Press and hold in the [MHz(SET)] key for one second, then rotate the DIAL knob to
select "30 NM SET."
3.
Press the [MHz(SET)] key. You will notice the first character location blinking,
indicating that you are now in the Alpha-Numeric ("A/N") entry mode. Within the
A/N entry mode, rotate the DIAL knob to select characters; pressing the
[LOW(A/N)] key will move the character's entry location to the right.
4.
Rotate the DIAL knob to select the desired number, letter, or symbol, then press
the [LOW(A/N)] key to move the next character's location. Move two slots if you
want to put in a space.
5.
Repeat step 4, as necessary, to complete the name tag (up to six characters) for
your memory, then press the [MHz(SET)] key momentarily to save the A/N name
just entered.
[8].
26
FCC ID:K6620393X50
IC: 511B-20393X50
Operating Manual
[*]. To recall Memory Channel
Advertisement
