Advertisement
Available Values: ON / OFF
Default: OFF
This function is only used to move a spurious response "Birdie" should it fall on a
desired frequency.
11 CW ID
Function: Enables/Disables the CW identifier during ARTS Operation.
Available Values: ON / OFF
Default: OFF
12 CWTRNG
Function: Enables/Disables the CW Training feature and selects the sending speed of
the morse Code.
Available Values: 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 15 / 17 / 20 / 24 / 30 / 40 WPM /
OFF or 20 / 25 / 30 / 35 / 40 / 45 / 50 / 55 / 60 / 65 / 75 / 85 / 100 / 120 / 150 / 200 CPM
Default: OFF
Note: To switch units between "WPM" and "CPM," just press the [MHz(SET)] key.
13 DC VLT
Function: Indicates the DC Supply Voltage.
14 DCS CD
Function: Setting of the DCS code.
Available Values: 104 standard DCS codes
Default: 023
15 DCS RV
Function: Enables/Disables "Inverted" DCS code decoding.
Available Values: ENABLE / DISABL
Default: DISABL
16 DIMMER
Function: Setting of the front panel display7s illumination level.
Available Values: 0 (OFF) - 10
Default: 5
49
FCC ID:K6620393X50
IC: 511B-20393X50
Operating Manual
Advertisement
