Button Manager Settings - Sharp AL-2061 Operation Manual

SCANNER AND FAX FUNCTIONS

Button Manager settings

Once installed, Button Manager normally runs in the background in the Windows
operating system. If you need to change Button Manager settings, follow the steps below.
For details on Button Manager settings, see Button Manager Help.
"Outline of Button Manager" (p.127)
1
Right-click the Button Manager icon (
select "Settings" from the pop-up menu.
The setting screen of Button Manager will open.
2
Click the tab of the scan menu that you want to set up.
3
Select the start-up application in the "Application Selection"
area.
Button Manager scan menu (factory default)
4
Set up the "Colour Mode", "Edge" and other scan settings in
the "Scan Setup" area.
5
Click the "OK" button.
This completes the settings.
126
If the Button Manager icon does not appear on the task bar, click the
"Start" button, select "All Programs" ("Programs" in Windows 2000),
select "Sharp Button Manager Z", and then click "Button Manager" to
start Button Manager.
When the "Show TWAIN setting screen when scanning" checkbox is
selected, the scan setting screen appears when scanning is executed to
let you adjust the scanning conditions.
Display/Button Manager menu
SC1:
SC2:
SC3:
SC4:
SC5:
SC6:
The start-up application must be installed before using.
) on the task bar, and
Application that starts
Sharpdesk
Email
FAX
OCR
Microsoft Word
Filing