Sharp AL-2061 Operation Manual page 101

Item
When "Mono 2 gradation" or "Grayscale" is selected
Light Source for "Color Mode", select "Red", "Green", or "Blue" for
the light source.
Select "JPG", "PDF", or "TIFF" for the file type of the
File Type
scanned image.
Compression Select "None", "MH (G3)", or "MMR (G4)" for the
Mode compression mode of the scanned image.
Pages Per
Select the number of pages per image file.
File
If you wish to use this scan mode as the default scan
mode when storing destinations, select the "Default
Default Scan Scan Mode" checkbox.
Mode The "Default Scan Mode" is also used for Scan to E-
mail when the e-mail address is directly entered or
selected from an LDAP server.
• For normal text originals, a sufficiently legible image is produced
when the color mode is set to "Mono 2 gradation" and the resolution
is 200 dpi or 300 dpi.
The 600 dpi setting should only be used in cases where high-clarity
image reproduction is required, such as a photograph or an
illustration. Note that a high resolution setting will result in a larger file
size, and transmission may not be successful if there is insufficient
disk capacity in the server to which the image is sent (or if the
administrator of the server has restricted the file size). If transmission
is not successful, you can try such measures as reducing the number
of scanned pages in the file or reducing the scan size setting for the
original.
• To open the scanned image without using the software program in the
CD-ROM that accompanies the machine, the recipient must have a
viewer program that can open the image format (file type) that was
selected as explained above.
• The factory default setting for the image format produces the smallest
file (File Type: TIFF, Compression Mode: MMR (G4)). If the recipient
cannot open the image, try sending the image in a different format.
• If the number of scanned originals is not divisible by the number set in
"Pages Per File", the last file will have less pages.
• The scan settings stored in a scan mode cannot be edited or deleted
if the scan mode has been selected for a destination.
SCANNER AND FAX FUNCTIONS
Description
Default
setting
Green
PDF
None
ALL
Not
selected
99