Sharp AL-2061 Operation Manual page 138

USER SETTINGS
Program
number
4
7
8
9
10
11
136
Program name
AUTO SHUT-OFF
TIME
LAYOUT IN 2IN1
OFFSET
FUNCTION
ROTATE ORIG.
IMAGE
AE/TEXT
RESOLUTION
2-SIDED COPY
MODE
Setting codes
(factory default
setting appears
in bold)
• This function automatically
1: 5 MIN.
2: 30 MIN.
3: 60 MIN.
4: 120 MIN.
5: 240 MIN.
• Use this setting to select the
1: PATTERN 1
2: PATTERN 2
• When enabled, this function
1: ON
2: OFF
• When two-sided copying is
1: ON
2: OFF
• This setting is used to change
1: 300dpi
2: 600dpi
• If the memory fills up when
1: HI-SPEED
2: NORMAL
Explanation
switches the machine to a state
that consumes even less power
than preheat mode if the set
duration of time elapses without
the machine being used when
the power is on. All lights
except the power save indicator
go off. To resume normal
operation, press the [START]
key ( ). Normal operation
also resumes automatically
when a print job is received or
scanning is begun from a
computer. While in auto power
shut-off mode, no keys
(except the [START] key
( )) can be used.
layout pattern when two original
pages are copied onto a single
sheet of paper (see page 34 for
the layout patterns).
offsets the position in the
paper output tray of sets of
copies during copy job, and
print jobs when using the
printer function.
performed, this function rotates
the image on the back of the
original. This is convenient
when binding the copies at the
top (tablet binding).
the copy resolution in AUTO
and TEXT mode from 600 x
300 dpi to 600 x 600 dpi (high-
quality mode). Scanning is
slower when high-quality
mode is used.
two-sided copying is
performed, "NORMAL" can be
selected to make copying
possible. However,
"NORMAL" results in a slower
copying speed. Normally "HI-
SPEED" is selected to enable
fast two-sided copying.