Button Manager Settings - Sharp AL-2050 Online Manual

2 SCAN

Button Manager Settings

Once installed, Button Manager normally runs in the background in the Windows operating system. If you need to change Button
Manager settings, follow the steps below.
For details on Button Manager settings, see Button Manager Help.
☞
Outline of Button Manager
1
Right-click the Button Manager icon ( ) on the
task bar, and select "Settings" from the pop-up
menu.
The setting screen of Button Manager will open.
If the Button Manager icon does not appear on the task
Note
bar, click the "start" button, select "All Programs"
("Programs" in Windows 98/Me/2000), select "Sharp
Button Manager O", and then click "Button Manager" to
start Button Manager.
2
Click the tab of the scan menu that you want to
set up.
CO NT E N TS I N D E X
3
Select the start-up application in the
"Application Selection" area.
●
When the "Show TWAIN setting screen when scanning"
Note
checkbox is selected, the scan setting screen appears when
scanning is executed to let you adjust the scanning conditions.
●
When you scan the two sided originals in the RSPF, only one
sided scan can be performed.
● On the applications other than "FAX", the format can be
selected in "File Format". The image quality of the JPEG
format (only can be selected on "Sharpdesk" and "Email") is
not as high as the other formats.
Button Manager scan menu (Factory default)
Display/Button Manager
menu
SC1:
SC2:
SC3:
SC4:
SC5:
SC6:
(part 1)
Application that starts
Sharpdesk
Email
FAX
OCR
Microsoft Word
Filing
27