Sharp AL-2061 Operation Manual page 105

FTP destination information
Item
Name (Required)
Initial (Optional)
Custom Index
Hostname or IP
Address
1
(required)*
User Name
(Optional)
Password
(Optional)
Directory
(Optional)
Enable Hyperlink
to FTP server to
be e-mailed
2
(Checkbox)*
E-mail Destination
Scan Mode
1
* If you entered a host name in "Hostname or IP Address", you will need to enter the
DNS server settings. (p.116)
2
* To perform Scan to FTP (Hyperlink), you must also enter the settings for the e-
mail server.
Enter the name of the destination (up to 36 characters).
Enter initial text for the destination (maximum of 10
characters). When the destination list is displayed in the
destination control screen, the initial text is used to group the
destinations.
Names can be assigned to the custom indexes as desired
(p.95), allowing convenient grouping of destinations. Select a
custom index for the destination to be stored.
Enter the IP address or host name of the FTP server
(maximum of 127 characters).
Enter the login user name for the FTP server (maximum of 32
characters).
Enter the login password for the FTP server (maximum of 32
characters).
If you wish to specify a destination directory on the FTP
server, enter the directory (maximum of 200 characters).
When you send a scanned file to an FTP server, you can have
a transmission notification automatically sent to the file
recipient by e-mail. To have transmission notifications sent,
select the checkbox. The FTP server name will appear in the
transmission notification as a hyperlink.
Select the recipient that you wish to notify of the file
transmission to the FTP server. To select a recipient here, the
recipient's e-mail address must have been previously stored.
(p.100)
Select the name of the scan mode that you wish to use for the
destination. The scan mode must be previously stored (p.98).
SCANNER AND FAX FUNCTIONS
Description
103