Graphics Controller
The X8DTU-LN4F+ features an integrated Matrox G200eW graphics chip, which
includes 16 MB of DDR2 memory.
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, auto-switching voltage regulators, chassis and CPU overheat sensors, virus
protection and BIOS rescue.
1-3
Server Chassis Features
The 2026T-URF4+ is built upon the SC219TQ-R920UBP chassis. Details on the
chassis and on servicing procedures can be found in Chapter 6.The following is a
general outline of the main features of the chassis.
System Power
The SC219TQ-R920UBP features a redundant 920W power supply consisting of
two power modules. The system does not need to be shut down when replacing or
removing a single power supply module.
SAS/SATA Subsystem
The SC219TQ-R920UBP chassis was designed to support 16 hot-swap 2.5" SAS/
SATA hard drives.
PCI Expansion Slots
Four standard size and two low-profi le add-on cards are accommodated by the
SC219TQ-R920UBP chassis. UIO cards are also supported. See our web site for
details (http://www.supermicro.com/products/nfo/UIO.cfm). See section 5-6 of this
manual for details on installing add-on cards.
Control Panel
The chassis' control panel provides you with system monitoring and control. LEDs
indicate system power, HDD activity, network activity (2), overheat/fan failure and
power failure. A main power button and a reset button is also included on the
control panel.
Chapter 1: Introduction
1-3