Operating; Adjusting The Volume; Temporarily Muting The Sound; Selecting An Input Signal - Hitachi CP-X608 User Manual – Operating Manual

Operating

Operating

Adjusting the volume

1.
Press the VOLUME button on the remote control.
A dialog will appear on the screen to aid you in adjusting the volume.
2.
To close the dialog and complete the operation, press the
VOLUME button again. Even if you do not do anything, the
dialog will automatically disappear after a few seconds.
adjustment is disable. Please see the AUDIO item of AUDIO menu.

Temporarily muting the sound

1. Press the MUTE button on the remote control.
A dialog will appear on the screen indicating that you have muted the sound.
To restore the sound, press the MUTE or VOLUME button.
Even if you do not do anything, the dialog will automatically
disappear after a few seconds.
always muted. Please see the AUDIO item of AUDIO menu.

Selecting an input signal

1. Press the INPUT button on the projector.
Each time you press the button, the projector switches its
input port as below.
RGB 1
VIDEO
1. Press the RGB button on the remote control to select an
input port for the RGB signal.
Each time you press the button, the projector switches its RGB
input port as below.
RGB 1
when TURN ON is selected for the AUTO SEARCH item in the OPTION menu
the projector will check other port in above order.
(continued on next page)
18
RGB 2
S-VIDEO COMPONENT (Y, C
RGB 2 M1-D
M1-D MIU
/R , C
B B
MIU
ENTER
PUSH
PAGE UP
ESC
POSITION
MAGNIFY
ON
(
POSITION
MAGNIFY
ON
OFF
FREEZE
38)
(
/B )
R R
STANDBY/ON
PAGE DOWN
MENU RESET
AUTO
MY BUTTON VOLUME
1
MUTE
38)
AUTO
MY BUTTON VOLUME
1
MUTE
2
KEYSTONE SEARCH
LASER
INDICATOR
VIDEO RGB