Hitachi CP-X608 User Manual – Operating Manual page 49

OPTION Menu (continued)
Item
SECURITY
(continued)
(continued on next page)
1.3 If you have forgotten your PASSWORD
1.3-1 Follow the procedure in 1.1-1 to display the
ENTER PASSWORD BOX.
1.3-2 While the ENTER PASSWORD BOX is
displayed, press and hold the RESET button
on the remote control for about 3 seconds or
the projector for about 3 seconds.
The 10 digit Inquiring Code will be displayed.
• If there is no key input for about 55 seconds while
the Inquiring Code is displayed the menu will close.
If necessary repeat the process from 1.3-1.
1.3-3 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD
2. Using the MyScreen PASSWORD Function
The MyScreen PASSWORD function can be used to prohibit access to the
MyScreen function and prevent the currently registered MyScreen image
from being overwritten.
2.1 Turning on the MyScreen
Function
menu to select MyScreen PASSWORD and
PASSWORD on/off menu.
2.2 Setting the PASSWORD
2.2-1 Display the MyScreen on/off menu using the
procedure in 2.1-1.
PASSWORD on/off menu to select TURN ON.
The ENTER PASSWORD BOX (small) will be
displayed.
PASSWORD. Move the cursor to the right
side of the ENTER PASSWORD BOX
CHECK PASSWORD BOX, enter the same
PASSWORD again.
Description
PASSWORD
OPTION Menu
Inquiring Code
(PASSWORD)
MyScreen PASSWORD
on/off menu
ENTER PASSWORD
BOX (small)
CHECK PASSWORD
BOX
49