Input Menu; Progressive; Ideo Nr - Hitachi CP-X608 User Manual – Operating Manual

INPUT Menu

INPUT Menu
From the INPUT menu, items shown in the table below can
be performed.
on the projector or remote control, or ENTER button on
the remote control to execute the item. Then perform it
according to the following table.
Item

PROGRESSIVE

VIDEO NR
3D-YCS
COLOR SPACE
(continued on next page)
32
TV FILM TURN OFF
• This function is performed only for an interlaced signal of a VIDEO
input, an S-VIDEO input or COMPONENT VIDEO input of 525i
(480i), 625i (576i) or 1125i (1080i) signal.
• When TV or FILM is selected, the screen image will be sharp.
FILM adapts to the 2-3 Pull-Down conversion system. But these
may cause a certain defect (for example, jagged line) of the picture
for a quick moving object. In such a case, please select TURN OFF,
even though the screen image may lose the sharpness.
HIGH MID
• This function performs only at a VIDEO input, an S-VIDEO or
COMPONENT VIDEO input of 525i(480i), 625i(576i) or 1125i (1080i)
signal.
• When this function is excessive, it may cause a certain
degradation of the picture.
STILL MOVIE
• This function performs only at a VIDEO input of NTSC, and PAL.
• MOVIE is the mode for images with a lot of motions like movies,
and STILL is the mode for images with few motions or completely
still ones like slides.
AUTO RGB
• This item can be selected only for an RGB signal or a component
video signal (except 525i (480i), 625i (576i) and SCART RGB).
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except AUTO.
Description
LOW
TURN OFF
SMPTE240 REC709 REC601