Picture Menu - Hitachi CP-X608 User Manual – Operating Manual

PICTURE Menu

From the PICTURE menu, items shown in the table below
can be performed.
Select an item using the
projector or remote control, and press the
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
according to the following table.
Item
BRIGHTNESS
CONTRAST
GAMMA
(continued on next page)
cursor buttons on the
Light Dark
Strong Weak
#1 DEFAULT #1 CUSTOM
#5 CUSTOM #5 DEFAULT
To adjust CUSTOM
Selecting a mode whose name includes
or the ENTER button displays a dialog to aid
you in adjusting the mode.
This function is useful when you want to
change the brightness of particular tones.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as
below.
No pattern Gray scale of 9 steps
Ramp
The eight equalizing bars correspond to eight tone levels of the test
pattern except the darkest in the left end. If you want to adjust the
2nd tone from left end on the test pattern (Gray scale of 9 steps),
use the equalizing adjustment bar "1". The darkest tone at the left
end of the test pattern cannot be controlled with any of equalizing
adjustment bar.
• When this function is performed, lines or other distortion may
appear.
cursor button
Description
#2 DEFAULT
#4 CUSTOM
Gray scale of 15 steps
PICTURE Menu
#2 CUSTOM #3 DEFAULT
#4 DEFAULT #3 CUSTOM
ENTER :
1 2 3 4 5 6
+0 +0 +0 +0 +0 +0
GAMMA [ CUSTOM 1 ]
7 8
+0 +0
27