Download Print this page

Hitachi CP-X600 - XGA LCD Projector User Manual

Technical manual

Advertisement

Quick Links

Projector
CP-X600
User's Manual – Operating Guide
Technical
Example of computer signal
Resolution (H x V) H. frequency (kHz) V. frequency (Hz)
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
024 x 768
024 x 768
024 x 768
024 x 768
52 x 864
280 x 960
280 x 024
280 x 024
280 x 024
600 x 200
280 x 768
400 x 050
NOTE
• Be sure to check jack type, signal level, timing and resolution
before connecting this projector to a computer.
• Some computers may have multiple display screen modes. Use of some of
these modes will not be possible with this projector.
• Depending on the input signal, full-size display may not be possible in some
cases. Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA
(600x200), the signal will be converted to the projector's panel resolution
before being displayed. The best display performance will be achieved if the
resolutions of the input signal and projector panel are identical.
• Automatically adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a
composite sync or a sync on G.
37.9
3.5
37.9
37.5
43.3
35.2
37.9
48.
46.9
53.7
49.7
48.4
56.5
60.0
68.7
67.5
60.0
64.0
80.0
9.
75.0
47.7
65.2
Rating
85.0
VESA
59.9
VESA
72.8
VESA
75.0
VESA
85.0
VESA
56.3
VESA
60.3
VESA
72.2
VESA
75.0
VESA
85.
VESA
74.5
60.0
VESA
70.
VESA
75.0
VESA
85.0
VESA
75.0
VESA
60.0
VESA
60.0
VESA
75.0
VESA
85.0
VESA
60.0
VESA
60.0
VESA
60.0
VESA
Signal mode
TEXT
VGA (60Hz)
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac 6" mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
52 x 864 (75Hz)
280 x 960 (60Hz)
SXGA (60Hz)
SXGA (75Hz)
SXGA (85Hz)
UXGA (60Hz)
W-XGA (60Hz)
SXGA+ (60Hz)


Advertisement

loading

Summary of Contents for Hitachi CP-X600 - XGA LCD Projector

  • Page 1 Projector CP-X600 User's Manual – Operating Guide Technical Example of computer signal Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 3.5 59.9 VESA VGA (60Hz) 640 x 480 37.9 72.8...
  • Page 2 Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b)
  • Page 3 Connection to the ports Connection to the ports RGB1 RGB2 VIDEO AUDIO IN 1 AUDIO IN 2 AUDIO S-VIDEO CONTROL AUDIO IN 3 AUDIO IN 4 RGB IN1, RGB IN2, RGB OUT AC IN D-sub 5pin mini shrink jack • Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω...
  • Page 4: Component Video

    Connection to the ports (continued) RGB1 RGB2 VIDEO AUDIO IN 1 AUDIO IN 2 AUDIO S-VIDEO CONTROL AUDIO IN 3 AUDIO IN 4 AC IN COMPONENT VIDEO RCA jack x3 • System: 525i(480i), 525p(480p), 625i(576i), 750p(720p), 25i(080i) Port Signal Component video Y, 1.0±0.1Vp-p, 75Ω terminator with composite Component video C , 0.7±0.1Vp-p, 75Ω...
  • Page 5: Audio Out

    Connection to the ports (continued) RGB1 RGB2 VIDEO AUDIO IN 1 AUDIO IN 2 AUDIO S-VIDEO CONTROL AUDIO IN 3 AUDIO IN 4 AC IN AUDIO IN 1, AUDIO IN 2 Ø3.5 stereo mini jack • 500 mVrms 47kΩ terminator AUDIO IN 3 L, AUDIO IN 4 RCA jack x2...
  • Page 6: Communications Setting

    RS-232C Communication RS-232C Communication CONTROL port RS-232C cable (Cross) RS-232C port of the projector of the computer - () () CD RD (2) (2) RD TD (3) (3) TD - (4) (4) DTR GND (5) (5) GND - (6) (6) DSR RTS (7) (7) RTS CTS (8)
  • Page 7 RS-232C Communication (continued) Requesting projector status (Get command) () Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)+ ‘00H’ +‘00H’) from the computer to the projector. (2) The projector returns the response code ‘DH’+ data (2 bytes) to the computer. Changing the projector settings (Set command) () Send the setting code Header + Command data (‘0H’+‘00H’+ type (2 bytes) + setting code (2 bytes)) from the computer to the projector.
  • Page 8 RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code Power Turn off BE EF 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 06 00 BA D2 01 00 00 60 01 00 BE EF 06 00 19 D3 02 00 00 60 00 00 [Example return] 00 00 01 00 02 00 [Off] [On] [Cool down] Input Source RGB1 BE EF 06 00 FE D2...
  • Page 9 RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code User Gamma Pattern BE EF 06 00 FB FA 01 00 80 30 00 00 9 step gray scale BE EF 06 00 6B FB 01 00 80 30 01 00 15 steps gray scale BE EF 06 00 9B FB 01 00 80 30 02 00 Ramp BE EF 06 00 0B FA 01 00 80 30 03 00 BE EF 06 00 C8 FA 02 00 80 30...
  • Page 10 RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code COLOR TEMP GAIN B BE EF 06 00 8C F5 02 00 B3 30 00 00 Increment BE EF 06 00 EA F5 04 00 B3 30 00 00 Decrement BE EF 06 00 3B F4 05 00 B3 30 00 00 COLOR TEMP BE EF 06 00 04 F5 02 00 B5 30 00 00 OFFSET R Increment BE EF 06 00 62 F5...
  • Page 11 RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code ASPECT BE EF 06 00 9E D0 01 00 08 20 00 00 16:9 BE EF 06 00 0E D1 01 00 08 20 01 00 14:9 BE EF 06 00 CE D6 01 00 08 20 09 00 SMALL BE EF 06 00 FE D1 01 00 08 20 02 00 NORMAL BE EF 06 00 5E DD 01 00...
  • Page 12 RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code RGB 1 SYNC ON G OFF BE EF 06 00 5E D7 01 00 10 20 02 00 SYNC ON G ON BE EF 06 00 CE D6 01 00 10 20 03 00 BE EF 06 00 0D D6 02 00 10 20 00 00 RGB 2 SYNC ON G OFF BE EF 06 00 A2 D6 01 00 11 20 02 00 SYNC ON G ON BE EF 06 00 32 D7...
  • Page 13 RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code MUTE TURN OFF BE EF 06 00 46 D3 01 00 02 20 00 00 TURN ON BE EF 06 00 D6 D2 01 00 02 20 01 00 BE EF 06 00 75 D3 02 00 02 20 00 00 SPEAKER TURN OFF BE EF 06 00 6E D5 01 00 1C 20 00 00 TURN ON BE EF 06 00 FE D4...
  • Page 14 RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code LANGUAGE ENGLISH BE EF 06 00 F7 D3 01 00 05 30 00 00 FRANÇAIS BE EF 06 00 67 D2 01 00 05 30 01 00 DEUTSCH BE EF 06 00 97 D2 01 00 05 30 02 00 ESPAÑOL BE EF 06 00 07 D3 01 00 05 30 03 00 ITALIANO BE EF 06 00 37 D1...
  • Page 15 RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code AUTO SEARCH TURN OFF BE EF 06 00 B6 D6 01 00 16 20 00 00 TURN ON BE EF 06 00 26 D7 01 00 16 20 01 00 BE EF 06 00 85 D6 02 00 16 20 00 00 AUTO OFF BE EF 06 00 08 86 02 00 10 31 00 00 Increment BE EF 06 00 6E 86 04 00...
  • Page 16 RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code MY BUTTON-2 RGB1 BE EF 06 00 C6 32 01 00 01 36 00 00 RGB2 BE EF 06 00 06 30 01 00 01 36 04 00 COMPONENT BE EF 06 00 96 31 01 00 01 36 05 00 S-VIDEO BE EF 06 00 A6 33 01 00 01 36 02 00 VIDEO BE EF 06 00 56 33...

This manual is also suitable for:

Cp-x600