Hitachi CP-X608 User Manual – Operating Manual page 45

OPTION Menu (continued)
Item
MY BUTTON
SERVICE
(continued on next page)
This item is to assign one of the following function to MY BUTTON
1 and 2 on the remote control (
to the chosen button.
• RGB1: Sets port to RGB1.
• RGB2: Sets port to RGB2.
• M1-D: Sets port to M1-D.
• MIU: Sets port to MIU.
• COMPONENT: Sets port to COMPONENT (Y, C
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
• e-SHOT: Displays the e-SHOT menu (
• INFORMATION: Displays a dialog of INPUT INFORMATION (
• AUTO KEYSTONE
Performs automatic keystone distortion correction (
• MY MEMORY:
Loads one of adjustment data stored (
• When the current adjustment is not saved to memory a dialog is displayed.
button to quit. Otherwise the current adjusted condition will be lost
by loading a data.
• PICTURE MODE: Changes the PICTURE MODE (
• FILTER RESET:
• ACTIVE IRIS: Changes the active iris mode.
• VOLUME+: Set the volume up.
• VOLUME-: Set the volume down.
Selecting this item displays the SERVICE menu.
the ENTER button on the remote control to execute the item.
FAN SPEED AUTO ADJUST
FACTORY RESET
FAN SPEED
of the cooling fans. The HIGH is the mode for use at
highlands etc. Note that the projector is noisier when
the HIGH is selected.
HIGH NORMAL
Description
6).
EXECUTE:
GHOST FILTER MESSAGE
INFORMATION REMOTE FREQ.
OPTION Menu
/P , C /P
B B R R
55).
36).
29).
25).
44).
(
LENS TYPE KEY LOCK
REMOTE RECEIV.
).
58).
45