Canon FAXPHONE L75 Service Manual page 113

LASER CLASS 1060P Chapter 4: Maintenance & Service
#080 [TX] Other party does not have ITU-T recommended subaddress reception
Cause: The other party's DIS bit 49 is 0.
Solutions:
Contact the other party and confirm whether or not their fax supports subaddress
receiving. Try sending again without a subaddress.
#081 [TX] Other party does not have ITU-T recommended password reception
Cause:
The other party's DIS bit 50 is 0.
Solutions: Contact the other party and confirm whether or not their fax supports ITU-T password
receiving. Try sending again without a password.
#082 [RX] Other party does not have ITU-T recommended selective polling transmission
function
Cause: The other party's DIS bit 47 is 0.
Solutions: Contact the other party and confirm that whether or not their fax can accept a polling
request with a subaddress. Try again without a subaddress.
#083 [RX] DCN received during polling reception
Cause:
Subaddress/password does not match.
Solutions: Contact the other party and confirm that the subaddress/password that you are using
are correct.
#084 [RX] In polling reception, other party does not have ITU-T recommended password
reception
Cause:
The other party's DIS bit 50 is 0.
Solutions: Contact the other party and confirm whether or not their fax supports receiving a
polling request with an ITU-T password. Try again without a password.
#102 [TX] In transmission, DCN received in response to passwords/subaddress
Cause: Password/subaddress does not match.
Solutions: Contact the other party and have them set a password/subaddress.
Cause: Other party's memory is full.
Solutions:
Contact the other party and have them make sufficient memory available.
4-20