Overview Of Each Function - Epson TM-m30III Technical Reference Manual

Overview of Each Function

Print Density
Monochrome
Selectable from 70% to 120% (5% increment)
Initial setting: 100%
Depending on the paper type, it is recommended to set the print density as shown in the table below for the best
print quality.
AP45KS-ND, AP50KS-ND, KT55PF
KT48FA, KT55FA, KT48PF, P5047(55)
When the print density level is increased, print speed may be reduced.
Multi-Tone
Selectable from 70% to 100% (5% increment)
Initial setting: 100%
• With multi-tone printing, 16-stage printing is available.
• Set the monochrome print density first before setting the multi-tone print density.
Print Speed
Selectable from levels 1 to 13 (Slow ~ Fast)
Initial setting: level 13
Depending on print conditions, such as print duty, print head temperature, and data transmission
speed, print speed is automatically adjusted, which may cause white lines due to intermittent print
(the motor sometimes stops). To avoid this, keep the print speed constant by setting it lower.
Automatic Paper Reduction
Upper Margin
• Enable
• Disable (initial setting)
Lower Margin
• Enable
• Disable (initial setting)
Supported papers
Chapter 3 Advanced Usage
Print density
100%
110%
67