INTRODUCTION Thank you for purchasing this CLARKE Hot Air Gun. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
6. KEEP other persons away. Do not let persons, especially children, not involved in the work, touch the tool or extension cable and keep them away from the work area. 7. NEVER operate a power tool when under the influence of alcohol, drugs or medication.
Page 4
- consult paint manufacturer etc where necessary. 10. DO NOT attempt any electrical repair yourself, consult a qualified electrician or the Clarke Service Department. 11. When finished take great care to place the gun where it cannot cause damage to property or other equipment, and cannot be accidentally touched by persons in the area.
ELECTRICAL CONNECTIONS WARNING! Read these electrical safety instructions thoroughly before connecting the product to the mains supply. Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 230VAC 50Hz.
PRODUCT OVERVIEW NO DESCRIPTION DESCRIPTION Reflector Nozzle Glass Protection Nozzle Concentrator Nozzle Defuser Nozzle Triangular Shavehook (scraper) Moulded Plastic Carry Case Hot Air Gun Handle for Triangular Shave Hook INVENTORY CHECK Before starting work, please check contents against the list above and advise your dealer immediately if any parts are missing.
OPERATION Before starting work it is recommended that you heat a test piece to ensure you have the correct heat setting. In addition you should always take steps to protect sensitive or delicate areas where the effect of heat could cause damage (i.e.
REMOVING PAINT FROM WINDOW FRAMES DO NOT point the gun directly at glass and always ensure it is adequately protected. A glass protection nozzle is provided for use when stripping window frames etc. 1. Fit the glass protection nozzle to the front of the hot air gun and angle it so that the gun can be placed up against the window,...
2. Heat the sleeve evenly. DE-FREEZING WATER PIPES Fit the reflector nozzle to the front of the hot air gun. 1. Always heat frozen areas inwards from the edge to the centre. 2. Take special care when defrosting plastic pipes. 3.
HT2000B05 Triangular Shave Hook HT2000B06 Triangular Shave Hook Handle HT2000B07 SPECIFICATION Model Number CHG2000B Dimensions (D x W x H) 244 x 74 x 255 mm Product Weight 0.71 kg Operating Voltage/Frequency 230 V - 50 Hz Input Power 2000 W...