Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Clarke CHG1500D
Summary of Contents for Clarke CHG1500D
- Page 1 HOT AIR GUN MODEL NO: CHG1500D PART NO: 3400757 USER INSTRUCTIONS GC0414...
- Page 2 INTRODUCTION Thank you for purchasing this CLARKE Hot Air Gun. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
-
Page 3: General Safety Rules
GENERAL SAFETY RULES WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND PERSONAL INJURY INCLUDING THE FOLLOWING. READ ALL THESE INSTRUCTIONS BEFORE ATTEMPTING TO OPERATE THIS PRODUCT AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. GENERAL SAFETY IN THE WORKPLACE 1. - Page 4 5. Before further use of the tool, it should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mountings or other condition that may affect its operation. 6.
- Page 5 7. Never use the hot air gun as a hair dryer. 8. Be aware that heat generated by the gun could cause nearby materials to ignite - particularly in confined spaces. Take all necessary precautions - have a fire extinguisher, or means to extinguish a fire to hand. 9.
-
Page 6: Electrical Connections
ELECTRICAL CONNECTIONS WARNING! Read these electrical safety instructions thoroughly before connecting the product to the mains supply. Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 230VAC 50Hz. - Page 7 OVERVIEW The CHG1500D hot air gun provides two temperatures/air speeds for varying applications. A protection nozzle is supplied for use when stripping window frames or similar, where hot air is prevented from being trained directly onto the glass. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
-
Page 8: Operation
OPERATION Before starting work it is recommended that you heat a test piece to ensure you have the correct heat setting. In addition you should always take steps to protect sensitive or delicate areas where the effect of heat could cause damage (i.e. -
Page 9: Removing Paint From Window Frames
REMOVING PAINT FROM WINDOW FRAMES DO NOT point the gun directly at glass and always ensure it is adequately protected. A glass protection nozzle is provided for use when stripping window frames etc. 1. Fit the glass protection nozzle to the front of the hot air gun and angle it so that the gun can be placed up against the window,... -
Page 10: Maintenance
MAINTENANCE This hot air gun is maintenance free, except always ensure that the air intake vents are kept clean. If used in a dusty environment clean the tool with low pressure compressed air. ENVIRONMENTAL PROTECTION Through the purchase of this product, the customer is taking on the obligation to deal with any waste electrical/electronic equipment in accordance with the WEEE Regulations in relation to the treatment, recycling, recovery and environmentally sound disposal of the WEEE. -
Page 11: Declaration Of Conformity
DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...