Related Manuals for Clarke CHT259
Summary of Contents for Clarke CHT259
- Page 1 WARNING: READ THESE INSTRUCTIONS BEFORE USE 3 LEGGED GLAZE BREAKER MODEL NO: CHT259 PART NO: 1801259 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0819 - ISS 1...
- Page 2 INTRODUCTION Thank you for purchasing this CLARKE 3 legged glaze breaker. The tool must be attached to a variable speed (400-800 rpm) drill and has been designed to De-glaze and remove uneveness from the inside surfaces of engine cylinders up to a diameter of 180 mm.
- Page 3 13. Finally, when you have cleaned the cyclinder properly, dry it and then lightly oil the exposed machined surfaces to prevent rust forming. REPLACEMENT GRINDING STONES The grinding stones are a consumable item, Replacement stones are available from your CLARKE dealer. Type Part No: Type...