Audio Sub-Menu - Audiovox AVDBR1 Owner's Manual

The Settings Menu

Audio Sub-Menu

1. In the Settings Menu, press the
button to select Audio.
2. Press the button, then press the
button to select a setting.
3. Press the OK button to view the options
list. Press the
the desired option.
4. Press the OK button to confirm your
selection.
5. Press the button to return to the
Settings Menu.
Settings
HDMI
This setting allows you to set the digital
output of the player to match the
capabilities of the AV receiver connected to
the player via HDMI.
Bitstream:
The disc's raw (native) audio format will be
output via HDMI.
PCM:
Select when the player is connected to a
multi-channel digital stereo amplifier via
HDMI.
Off:
Audio output via HDMI is disabled.
or
or buttons to select
Dolby DRC
Dolby DRC allows you to make the loud
parts of a movie's audio track quieter than
they would be in the theatre, without
making the dialog of the actors any quieter.
Off:
Movie soundtracks are played with the
standard dynamic range.
On:
Select when movie soundtracks are played
at low volume or from smaller speakers. Your
player applies appropriate compression to
or
make low-level content more intelligible
and prevent dramatic passages from getting
too loud.
Auto:
This setting turns on the Dynamic
Range Control for all Blu-ray Disc movie
soundtracks except Dolby TruHD.
- 37 -