Connecting The External Remote Ir Receiver - Audiovox AVDBR1 Owner's Manual

Installation
Connecting to Your Monitor
(Continued)
Note
• The RCA video connection only
supports 480i video output. If you have
the RCA video connected and the HDMI
connected, the following screen will
appear.
VIDEO OUT [Yellow RCA Jack]
does not support high
de nition video. Please
switch the TV/monitor to HDMI
mode to enjoy the high
de nition video; Or you may
unplug the connected HDMI
cable to resume 480i output on
RCA VIDEO OUT.
Note
• For best video quality, do not connect
an RCA audio/video cable and HDMI
cable at the same time.
Connecting the External
Remote IR Receiver
1. Plug the 1/8" plug on the External
Remote IR Receiver cable into the IR EXT
jack on the back of the Blu-ray player.
2. Install the REMOTE SENSOR in a location
where the infrared beam will not be
blocked or interrupted.
- 11 -
REMOTE
External
Remote
IR Receiver
Remote
Sensor