Initial Setup; The Initial Setup Wizard - Audiovox AVDBR1 Owner's Manual

Initial Setup

When you connect your Blu-Ray player to a
monitor and turn the player on for the first
time, the Initial Set Up Wizard appears.
The Initial Set Up Wizard will also appear if
you reload the factory default settings. See
page 38.
Initial Set Up Wizard
Follow the on-screen instructions to
customize the following settings to your
preference:
1. Turn on your monitor and Blu-ray player.
The AVDBR1 Player Set Up Wizard
appears.
2. Press the OK button. The Language
Settings screen appears.
3. Press the or
on-screen language.
Options: English, French or Spanish.
button to select the
4. Press the OK button. The Resolution
Settings screen appears.
Press the
resolution.
Options: Auto, 480i, 480p, 720p, 1080i
or 1080p.
5. Press the OK button. The Aspect Ratio
screen appears.
6. Press the
aspect ratio
Options: 16:9 Full, 16:9 Normal,
4:3 Pan & Scan or 4:3 Letterbox.
7. Press the OK button. The Setup Wizard is
finished screen appears.
- 27 -
or button to select the
or button to select the