Ironman Fitness ASCENDER Owner's Manual page 8

Assembly
Figure 6
Locate bag labeled Figure 6. Locate brack-
et covers. Attach bracket cover to the hand-
rail assembly by lining up hole, and secur-
ing using one screw, M5*0.8-12. Repeat for
other side.
Note: Do not overtighten screw, this will
damage bracket cover.
Figure 7
Locate bag labeled Figure 7. Locate
Handlebars. Attach Left Handlebar to
Handlebar Assembly using three M8*16mm
Hex Bolts. Repeat for other handlebar.
Figure 6
HANDRAIL ASSEMBLY
Figure 7
RIGHT HANDLEBAR
LEFT HANDLEBAR
CONSOLE TUBE
M8*16 HEX BOLT
8
SCREW
BRACKET COVER