Ironman Fitness ASCENDER Owner's Manual page 10

Assembly
Figure 10a
Figure 10
Step 1:
Locate console. Remove the back cover of the console by unscrewing the two screws (figure
10a). Feed cables coming from the unit through the hole located on the bottom of the back
cover (figure 10b).
Step 2:
Connect the coaxial cable coming from the unit to the coaxial input located on the console.
Note: For optimal reception, ensure that the coaxial cable is firmly tightened. Connect the
pulse wires coming from the unit to the pulse wires coming from the console. Connect the RCA
cables to their respective connector on the console. Note: The RCA cables and the connectors
on the console are color coordinated. Connect like colors together. Connect the gearbox cable
to the gearbox adapter on the back of the console. Finally, connect the power cable to the
power cable connection on the back of the console (figure 10c)
Figure 10c
POWER CABLE
COAXIAL CABLE
PULSE WIRES
Step 3:
Reattach the back cover of the console using the screws that were
previously removed (figure 10d).
RCA CABLES
GEARBOX CABLE
10
Figure 10b
Figure 10d