Ironman Fitness ASCENDER Owner's Manual page 6

Assembly
Figure 2
Locate bag labeled Figure 2. Locate cover.
Secure cover to main frame by using three
M5*0.8-12 screws on the left side of unit.
Repeat for the right side.
Figure 3
Locate bag labeled Figure 3. Locate left
and right handrail assemblies. Secure left
handrail assembly to console tube by using
one washer, one spring washer, one M10*20
hex bolt, and one end cap. Repeat for the
right side.
Note: The handrail assembly will only go
onto the console tube one way. The connec-
tor on the middle of the handrail assembly
will face outwards.
Figure 2
COVER
M5*0.8-12 SCREW
Figure 3
CONSOLE TUBE
M10*20, HEX BOLT
END CAP
6
CONSOLE TUBE
SPRING WASHER
WASHER
HANDRAIL ASSEMBLY