Important Safety Instructions - Samlexpower SEC-1212CE Installation & Operating Manual

Switch mode dc power supply
Table of Contents

Advertisement

CAUTION !
RISK OF ELECTRIC SHOCK
!
!
DO NOT OPEN
WARNING—TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THERE
ARE NO USER SERVICEABLE PARTS INSIDE—REFER TO QUALIFIED
SERVICE PERSONNEL.

IMPORTANT SAFETY INSTRUCTIONS

Please read before using your power supply.
1.) It Is recommended that you return your power supply to a qualified Samlex dealer
for any service or repair. Incorrect assembly may result in electric shock or fire.
2.) To reduce the risk of electric shock, unplug power supply from outlet before at-
tempting any maintenance or cleaning. Turning off controls will not reduce this risk.
3.) An extension cord should not be used unless absolutely necessary. If an exten-
sion cord must be used make sure that the pins on the plug are the same num-
ber, size and shape as those of the original power supply plug.
4.) Place the unit in an area that will allow air to flow freely around the unit. DO NOT
block or obstruct vent openings on the side/bottom of the unit.
5.) Keep the unit away from moisture and water.
6.) NEVER OPERATE THE UNITS IN PARALLEL
WARNING
Your power supply should be grounded to reduce the risk of electric shock. The
power supply is equipped with grounding conductor and grounding plug.
The cord must be plugged into an outlet that is properly installed and grounded in
accordance with all local codes and ordinances. Never alter the AC cord of plug pro-
vided. If the cord will not fit the outlet, have a proper outlet installed by qualified elec-
trician. Improper connection can result in risk of electric shock.
DO NOT USE THE POWER SUPLY FOR DIRECT CHARGING OF BATTERY OR
DIRECT CONNECTION TO A BATTERY FOR BATTERY BACK-UP. ( Please read
the section on Battery Back-up ).
1.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sec-1223ce

Table of Contents