Important Safety Instructions - Samlexpower SEC-1212 Installation & Operating Manual

CAUTION !
RISK OF ELECTRIC SHOCK
Notes: DO NOT OPEN
WARNING—TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THERE ARE
NO USER SERVICEABLE PARTS INSIDE—REFER TO QUALIFIED SER-
VICE PERSONNEL.

IMPORTANT SAFETY INSTRUCTIONS

Please read before using your power supply.
1.) It Is recommended that you return your power supply to a qualified dealer for any
service or repair. Incorrect assembly may result in electric shock or fire.
2.) To reduce the risk of electric shock, unplug the power supply from the outlet
before attempting any maintenance or cleaning. Turning off controls will not reduce
this risk.
3.) An extension cord should not be used unless absolutely necessary. If an exten-
sion cord must be used make sure that the pins on the plug are the same
number, size and shape as those of the original power supply plug.
4.) Place the unit in an area that will allow air to flow freely around the unit. DO NOT
block or obstruct vent openings on the side/bottom of the unit.
5.) Keep the unit away from moisture and water.
6.) NEVER OPERATE THE UNITS IN PARALLEL
WARNING
Your power supply should be grounded to reduce the risk of electric shock. The
power supply is equipped with grounding conductor and grounding plug.
The cord must be plugged into an outlet that is properly installed and grounded in
accordance with all local codes and ordinances. Never alter the AC cord of plug
provided. If the cord will not fit the outlet, have a proper outlet installed by qualified
electrician. Improper connection can result in risk of electric shock.
DO NOT USE THE POWER SUPLY FOR DIRECT CHARGING OF BATTERY OR
DIRECT CONNECTION TO A BATTERY FOR BATTERY BACK-UP. ( Please read
the section on Battery Back-up ).
2.