Important Safety Instructions - Samlexpower SEC-40BRM-230 Owner's Manual

SeCtION 1 |
The following safety symbols will be used in this manual to highlight safety
and information:
WARninG!
Indicates possibility of physical harm to the user in case of non-compliance.
!
cAUtion!
Indicates possibility of damage to the equipment in case of non-compliance.
i
inFo
Indicates useful supplemental information.
Please read these instructions before installing or operating the unit to prevent personal
injury or damage to the unit.
!
cAUtion!
All electRicAl inStAllAtionS mUSt meet locAl And nAtionAl WiRinG
codeS And ShoUld be peRFoRmed by A qUAliFied electRiciAn.
operation of cooling Fan
The heat produced is extracted by forced air cooling. In case any of the fans fail, light
and sound alarms will be activated. Immediately SwITCh off the power to the unit to
prevent damage due to over heating.
connection to Ac outlet
The power supply should be operated only from a standard 2 Pole, 3 wire grounding
receptacle. do not connect to A 2 pole, 2 WiRe ReceptAcle thAt hAS no
GRoUndinG.
Replacement of power cord plug
The power cord is provided with a moulded, standard European 2 Pole, 3 wire ground-
ing plug ("Schuko"—250V, 16A), the plug may be replaced to suit a different suitable
receptacle.
4 | SAMLEX AMERICA INC.

Important Safety Instructions