Bridge Battery - NEC VERSA FX Service And Reference Manual

Locate and remove the two screws that secure the IR/sound board to the system. Lift the
2.
board out of the system.
A – IR/Sound Board

Bridge Battery

Use the following steps to remove the bridge battery.
1. Remove the keyboard, front cover assembly, top cover assembly, and PC card assembly
from the system.
Disconnect the battery from connector P20 on the connector board.
2.
3. Lift the battery out of the system.
Removing the IR/sound board
B – Screw
Removing the bridge battery
A – Bridge Battery
Disassembly and Reassembly 3-13