Sharp MX-FXX1 Manual page 110

(3)
5 10 15 To
Condition
Settings
AAA AAA
Address Review
CCC CCC
Address Entry
EEE EEE
Global
GGG GGG
Address Search
Sub Address III III
Frequent Use
Sort Address
(4), (6)
2
If a passcode has been omitted in the memory box of the other machine, (6) and (7) are not necessary.
3
To cancel scanning...
Press the [STOP] key (
(2)
Cc
BBB BBB
1
2
DDD DDD
FFF FFF
HHH HHH
JJJ JJJ
ABCD EFGHI JKLMN OPQRST UVWXYZ
) while the original is being scanned.
Enter the destination fax number.
(1) Touch the [Address Book] key in the base
screen.
(2) Touch the one-touch key of the desired
destination.
If the destination is not stored in the address book, enter
the fax number with the numeric keys.
(3) Touch the [To] key.
If you entered the fax number with the numeric keys, this
is not necessary.
If the sub-address and passcode are stored in the one-touch
key, the following sub-steps are not necessary. Go to step 3.
(4) Touch the [Sub Address] key.
"/" appears.
(5) Enter the sub-address with the numeric
keys.
(6) Touch the [Sub Address] key.
"/" appears.
(7) Enter the passcode with the numeric keys.
Press the [BLACK & WHITE START] key
( ).
Scanning begins.
• If you inserted the original pages in the document feeder
tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan
each page one page at a time.
When scanning finishes, place the next original and press the
[BLACK & WHITE START] key (
have been scanned and then touch the [Read-End] key.
A beep will sound to indicate that scanning is finished.
When the relay machine receives the fax, it will automatically
transmit the fax to each of the end receiving machines
programmed in the memory box.
110
). Repeat until all pages