Specifying The Scan Size And Send Size (Enlarge/Reduce Transmission) - Sharp MX-FXX1 Manual

SPECIFYING THE SCAN SIZE AND SEND SIZE
(Enlarge/Reduce Transmission)
When the original is placed, its size is automatically detected and displayed in the base screen.
The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.
In the above screen, the scan size (the placed original) is A4 (8-1/2" x 11") and the send size is auto. If, for example, the
scan size were A4 (8-1/2" x 11") and the send size were B5 (5-1/2" x 8-1/2"), the image would be reduced before
transmission.
• Only standard original sizes can be automatically detected.
☞
STANDARD SIZES
• When the original size is a non-standard size, or if the size is not detected correctly, manually specify the original scan
size.
☞
Specifying the original scan size (by paper size)
Specifying the original scan size (by numerical values)
Scan Internet Fax
Address Book
Direct TX
Sub Address
Resolution
Special Modes
Address Review
File
Quick File
"Scan Size"
"Send Size" is set to
B5 (5-1/2" x 8-1/2")
A4 (8-1/2" x 11")
(page 27)
Fax USB Mem. Scan
Original Auto A4
Scan: Send:
Exposure Auto
Standard
Auto Reception
Fax Memory:100%
Transmission
(page 46)
(page 48)
45
PC Scan
Auto
The image is reduced
to B5 (5-1/2" x 8-1/2")
before transmission