Sharp MX-FXX1 Manual page 66

(3)
5 10 15 To
Condition
Settings
AAA AAA
Address Review
CCC CCC
Address Entry
EEE EEE
Global
GGG GGG
Address Search
4
III III
Sub Address
Frequent Use
Sort Address
In addition to specification by one-touch key, a destination can also be specified using a search number. You can also
directly enter a fax number with the numeric keys or look up a destination in a global address book. For more
information, see
5
To cancel scanning...
Press the [STOP] key (
When the erase function is used, erase takes place at the edges of the original image. If you also use a reduction or an
enlargement setting, the erase width will change according to the selected ratio. For example, if the erase width setting is
20 mm (1") and the image is reduced to 50%, the erase width will be 10 mm (1/2").
To cancel an erase setting...
Touch the [Cancel] key in the screen of step 3.
System Settings (Administrator): Erase Width Adjustment
The default erase width setting is linked to the copy mode system setting, and can be set from 0 mm to 20 mm (0" to 1"). The
factory default setting is 10 mm (1/2").
(2)
Cc
BBB BBB
DDD DDD
FFF FFF
HHH HHH
JJJ JJJ
ABCD EFGHI JKLMN OPQRST
"2. ENTERING DESTINATIONS" (page 15).
).
Enter the destination fax number
(1) Touch the [Address Book] key in the base
screen.
1
2
(2) Touch the one-touch key of the desired
destination.
(3) Touch the [To] key.
UVWXYZ
Press the [BLACK & WHITE START] key
( ).
Scanning begins.
• If you inserted the original pages in the document feeder
tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan
each page one page at a time.
When scanning finishes, place the next original and press
the [BLACK & WHITE START] key (
pages have been scanned and then touch the [Read-End]
key.
A beep will sound to indicate that scanning is finished.
66
). Repeat until all