Table of Contents
Advertisement
Items to Assemble:
9
1 Grease Clip
Hang grease clip from center of grill bottom.
Use an empty soup can (not included) to hang from grease clip.
CAUTION
!
• Failure to install can in clip will cause hot
grease to drip from bottom of grill with
risk of fire or property damage.
Check to make sure ALL valves are engaged
in the burner tubes and the clips are attached
(as shown). Tighten clip if needed by simply
squeezing the two long sides, A and B, of the
clip together. Clip(s) may loosen when grill is
moved, recheck each time.
Item to Assemble:
10
1 12' Natural Gas Hose
1. On the back right side, attach 12' natural gas hose to valve.
2. Use a wrench to hold fitting on grill. Tighten the connection with
an adjustable wrench.
3. Leak test as shown on Page 12 before using grill.
10 • 4638234
View of underside of Grill Bottom
Burner Tube
Center of
grill bottom
Grease clip
Console
Assembly
A
B
Valve
Clip
Advertisement
Table of Contents
