Check Point - Commax CAV-71BQ User Manual

14
If you think that the product has trouble, please first check below contents before you ask a repair.
Troubles

Check Point

1.The power supply
The power supply is
code is missing or not.
not on.
2.The power supply switch
All works are stopped
(down) is off or not.
1.The wiring between other
units is connected correctly
A Call operation is not
in good order or not.
performed.
2. The wiring is missing or not.
(Door, Interphone function)
3. A Room id is set or not.
The product does not
1. A sound volume lies
produce the sound.
in minimum or not.
(Call volume, Talk volume)
1. There is a strong re-
flected light behind the
The screen is dark.
visitor or not.
The screen is strange.
2. The screen control is
adjusted correctly.
1. The connector on the
We can see the visitor
handset is properly
image but no voice.
inserted to the product?
1. Auto recording is
No stored image found
assigned?
Actions
1. Please connect the
power supply cord
2. Please turn on the power
supply switch (down)
pushing to the right.
1. Please refer to connection
related page and manage.
2. Please connect correctly
to the terminal.
3. Please refer to Room id
setting related page.
1. Please adjust the sound
volume properly turning
to the right, as you want.
1. Please change the angle
of camera lens.
2. Please initialize the
screen control.
(Refer to setting related page)
1.Please put the
connector properly again.
1.Please set the status of
"AUTO RECORD"
as "YES"
15