Exiting From The Configuration/Setup Utility Program - IBM IntelliStation M Pro Type 6868 User Manual

When working with the Configuration/Setup utility program menu, you
must use the keyboard. The following table shows the keys used to
accomplish various tasks.
Keys
↑ ↓
← →
Enter
Esc
+
−
0–9
F1
F9
F10
Note: Active keys are displayed at the bottom of each screen; not all of the
above keys are active on every menu.

Exiting from the Configuration/Setup Utility program

When you finish viewing or changing settings, press Esc to return to the
Configuration/Setup utility program menu (you might have to press Esc
several times). If you want to save the new settings, select Save Settings
before you exit. Otherwise, your changes will not be saved.
Function
Use these arrow keys to move among menu items until
the item you want is highlighted.
Use these arrow keys to display and toggle among choices
for a menu item.
Press this key to select a highlighted menu item.
Press this key to exit from a menu after viewing or
making changes to the settings in the menu.
Use this key in some menus to increase the numerical
value of a setting.
Use this key (the minus or hyphen key) in some menus to
decrease the numerical value of a setting.
Use these number keys in some menus to change the
numerical value of a setting.
Press this key for help on a selected menu item.
Press this key if you changed and saved the setting of a
selected menu item and you want to restore the setting
that was active before you made the change.
Press this key to return the setting of a selected menu item
to a default value.
Chapter 4. Using the Configuration/Setup Utility program
45