IBM IntelliStation M Pro Type 6868 User Manual page 102

To install a drive in bays 1, 2, or 3, go to "Installing Drives in Bays 1, 2, or
3."
To install a drive in bays 5, 6, or 7, go to "Installing a drive in bay 5, 6, or
7" on page 88.
Installing Drives in Bays 1, 2, or 3
Before you begin
Read "Preparing to install options" on page 62.
Turn off the computer and all other connected devices.
Disconnect all external cables and power cords, and then remove
the computer cover (see "Disconnecting cables and removing the
cover" on page 64).
1. Remove the bay panel covering the bay where you want to install the
drive.
2. Remove the static shield from the drive bay where you are installing
the drive.
3. Bay 2 has a conversion bracket installed that allows for the installation
of 3.5-inch drive. If you are installing a 5.25-inch drive into bay 2,
remove the bracket.
86
IntelliStation User Guide