Usb - Yamaha PianoCraft MCR-750 Owner's Manual

Problem
No sound.
The power of this unit is off.
The iPod software version has not been
updated.
The iPod is in the process of connecting
with this unit.
No sound. The iPod is not connected correctly.
The iPod sounds, but
you cannot operate it
with this unit or the
remote control.
No sound of your
No sound of your iPod can be output
iPod from the TV. from this unit to the TV through the
HDMI cable.
This unit cannot be
The iPod is not supported by this unit.
operated by the
remote control.
The iPod is not connected correctly.
The iPod software version is out of date.
You cannot operate The iPod is not connected correctly.
from the iPod.
The playback
The iPod you set is not compatible with
information is not the playback information display.
displayed on the
front panel display.
The iPod does not The iPod is not connected correctly.
charge up.
The iPod is not supported by this unit.

USB

Note
In case of a transmission error without a status message appearing on the front panel of this unit, check the connection to the USB
device (refer to page 13).
Status message
USB ERROR
Cause
Cause
The connected USB device is not
playable on this unit.
The USB device is connected at an
angle.
Remedy
Connect the power cable correctly.
Download the latest iTunes software to update the
iPod software version to the latest.
Please wait for a while.
Connect the iPod and this unit by a USB cable
correctly.
Use the speakers of this unit.
Only iPod classic, iPod nano (2nd, 3rd, 4th, 5th and
6th generation), iPod touch (1st, 2nd, 3rd, and 4th
generation), iPhone, iPhone 3G/3GS, iPhone 4, and
iPad are supported.
Connect the iPod and this unit by a USB cable
correctly.
Update the iPod software version to the latest. If the
problem cannot be solved, even with the latest
software, reset the iPod.
Connect the iPod and this unit by a USB cable
correctly.
Only iPod classic, iPod nano (2nd, 3rd, 4th, 5th and
6th generation), iPod touch (1st, 2nd, 3rd, and 4th
generation), iPhone, iPhone 3G/3GS, iPhone 4, and
iPad are supported.
Connect the iPod and this unit by a USB cable
correctly.
Only iPod classic, iPod nano (2nd, 3rd, 4th, 5th and
6th generation), iPod touch (1st, 2nd, 3rd, and 4th
generation), iPhone, iPhone 3G/3GS, iPhone 4, and
iPad are supported.
Remedy
Disconnect the USB device. Change input source
other than USB and select USB as input source
again. Then connect playable USB device again.
TROUBLESHOOTING
Page
11
—
—
11
—
11
11
—
11
11
11
11
Page
13
47
En